News

Paper jams are a common problem with printers. Incorrect removal methods may cause greater damage to the machine. After a paper jam has occurred, turn off the power first, and then open the front door to identify the location of the paper jam. If the paper is stuck in front of the fixing unit, it […]

After the toner in the toner cartridge is used up, the toner shortage indicator of the printer is on, and the toner cartridge should be refilled. After adding powder, use a soft cloth or a brush to clean around the powder box. At the same time, the power cord of the printer should be unplugged, […]

1. Use copy paper correctly Laser printers are used to output paper patterns, so first select the paper. It is best to choose electrostatic copy paper. The range of paper is 60-105g / m2. Generally, 70g / m2 copy paper is often used. Paper that is too thin or too thick can easily cause paper […]

1. The printed document and the drum core appear at the same time in the longitudinal width of more than 1 cm at the same time: This is a problem with the scraper, causing the powder on the stick core to be dirty. 2. Long black stripes appear on the printed document: usually the scraper […]

1. There are sticky substances on the drum core, such as grease, etc. Solution: Wipe the drum core with a clean soft cloth. 2.Filled with powder Solution: Be careful about filling the powder, don't add too much at a time. 3.Toner quality is not good Solution: Choose good quality toner. 4. There is a problem […]

April 2nd World Autism Awareness Day ,there are 1 in 160 children is suffering from autism , and they are right next to you. We should give more concern and care to them.

(1) Use environment: The temperature is over 0 ~ 33 degrees Celsius, the relative humidity is 20 ~ 80%, and the temperature is too high or too low, which will affect the printing effect. (2) Use printing media with caution: Be careful not to use paper with uneven cuts, tears, wrinkles, curling, holes, and staples; […]

If you have print quality problems, follow these steps to clean the corona wire: Do not use any type of spray to clean the inside and outside of the device, as this may result in fire or electric shock. 1.Open the front cover. 2.Slowly remove the drum unit and toner cartridge assembly. 3. We recommend […]

Laser printing equipment, because of its stable output and large printing volume, has been accepted by various types of enterprises. For such a core component of printing equipment that has fully entered our office life, you may never have noticed that it is a photosensitive drum! When the user is judged by the performance parameters […]

In the process of using the printer, it is often encountered that the ink cartridge is not recognized. Sometimes, as long as you reinstall the ink cartridge or restart the printer, the ink cartridge recognition will return to normal, but often these small tips and small methods can't solve the above problems. First, check if […]

Why is the printer ink head blocked? 1. The ink head of an inkjet printer is very precise, only a few tenths of a person's hair is small, so if the volume of impurities in the printer ink is larger than the size of the ink head, it is obvious that these inks will block […]

F-Fe3O4 crystal powder (PLGMENT): 20-30% Polyacrylate-styrene copolymer: 50-60% CCA: 10-20% Fluidizing agent SiO2, etc. Surface modifier polyethylene / polypropylene paraffin Toner is divided into magnetic toner and non-magnetic toner, and the distribution ratio of the toner used by each machine model is different. Many bottled toners or bulk toners are not distinguished. Only one type […]