製品ニュース

Methods to determine whether the toner cartridge needs to be replaced are: ①Check the print quality. If the printed text is unclear, has missing prints, ghosting, blurring or uneven colors, this is usually a sign that the toner cartridge needs to be replaced. ②Observe the surface condition of the toner cartridge. If the surface of the toner cartridge has obvious wear, scratches, cracks, or discoloration, these are signs that the toner cartridge is worn and may need to be replaced. ③Check the toner cartridge life and the number of pages printed. Many modern printers have a recording function for toner cartridge life, which can be viewed in the printer's settings. […]

The primary charge roller is a cylinder composed of a metal core and conductive rubber. Its main function is to bring a uniform charge to the drum core to absorb toner, and to eliminate the residual potential on the drum core. The primary charge roller is a new environmentally friendly charging method that reduces the generation of ozone, charges evenly, and is noise-free. It is widely used in laser printers and is also used in low-speed copiers. The voltage of the laser printer charging roller is -600V to -700V, and there are also positive charging ones. Charging electrode wires can charge at a higher level, generally between 6000V and 8000V. […]

1. Different implementation principles The biggest difference between chip-based toner cartridges and chip-less toner cartridges lies in the different implementation principles. The chip design of the toner cartridge adopts smart chip technology. The chip has a built-in program that automatically adjusts printer parameters through real-time monitoring and feedback of printer status, toner cartridge status and other information to achieve better printing results. The chipless toner cartridge does not have a built-in smart chip. It works directly between the printer controller and the toner cartridge driver. The traditional control circuit controls the work of the toner cartridge based on modes and signals, and cannot automatically adjust and optimize the printing effect. […]

THI Tech Hub Innovation Europe has warned of another HP firmware update. Affected are devices that use HP953 and 957 series cartridges. This is HP’s Office Jet Pro range. The latest firmware update is firmware 2349A. THI Tech Hub Innovation Europe said in its announcement that “Jetworld cartridges that work with the latest firmware are ready for dispatch from stock.“ Article Source：https://www.therecycler.com/

1. Store detailed toner cartridge information (facilitates printing and identification of all toner cartridge models) 2. Display the print volume of the toner cartridge instead of controlling the print volume 3. Display area information (some printer manufacturers design different chip codes for different areas) 4. Failure to authorize the printer and toner cartridge passes a. Must respond accurately to printer requests b. Use the correct encryption method c. Respond within the specified time 5. Manage toner information according to printer requirements a. The printer determines the remaining amount of toner and writes the information to the chip b. The chip feeds back this information when the printer needs it 6. […]

1. There are sticky substances on the drum core, such as grease, etc. Solution: Wipe the drum core with a clean soft cloth 2. The powder is not filled in properly. Solution: Fill the powder carefully and don’t add too much at one time 3. Poor toner quality Solution: Choose good quality toner 4. There is a problem with the waste toner scraper (such as scratches, aging, etc.) Solution: Replace corresponding accessories 5. There is a problem with the powder bin scraper Solution: Replace corresponding accessories 6. The drum core is damaged Solution: Replace corresponding accessories Attached is a schematic diagram for replacing the toner cartridge OPC（Organic Photoconductor）: