製品ニュース

Printer toner powder,  is a powdered substance used in laser printers to form images on paper. Its main components are: 1. Resin: the main imaging substance, which constitutes the main component of carbon powder; 2. Carbon black: the main imaging substance, which has the function of adjusting the color depth, which is usually called blackness; 3. Magnetic iron oxide: under the magnetic attraction of the magnetic roller, it can carry carbon powder and adsorb it on the magnetic roller; 4. Charge control particles: control the charge of carbon powder to make the carbon powder uniformly charged; 5. Lubricant (silicon particles): plays a lubricating role and controls friction charge at the […]

Toner has a shelf life. It can generally be stored for two years without opening the package. It is recommended to use it within six months after taking it out of the package. Expired toner may agglomerate due to being left for a long time, affecting normal use and the life of the toner cartridge. , it is not recommended to continue to use it.

1. Turn off the printer power and remove the cartridge from the machine. 2. Clean the waste toner in the cartridge. 3. Add toner to the cartridge toner bin. 4. Replace the chip after adding toner, otherwise it is easy to burn the chip. Use tweezers to remove the chip, and then install the prepared new chip in the position and direction of the original chip.

1. Do not touch the surface of the OPC drum with your hands. 2. It is strictly forbidden to use chemical reagents (such as alcohol) to wipe the surface of the OPC drum. 3. Do not hit the surface of the OPC drum with hard objects. 4. Be careful not to bring office supplies such as staples into the printer. 5. After removing the toner cartridge or the OPC drum from the machine, it should be placed away from light, preferably covered with newspaper or other things.

Problem 1: Too much waste toner Clean the waste toner bin or use a toner cartridge suitable for low coverage printing. Problem 2: Toner leakage ①If the printer prints a white sheet: first check if there is any problem with the printer. If there is no problem, it means that there is a problem with the printer toner cartridge during assembly. ②Vertical black lines of more than 1 cm in width appear on the printed document and the drum core at the same time. Generally, customers also think that it is toner leakage: this is a problem with the scraper, causing the powder on the stick core to be not […]

It may be caused by a variety of reasons. Here are some possible solutions: 1. Print paper problem: The print paper may be damp, causing the printout to fade. It is recommended not to store the print paper in a humid environment. 2. Printer settings: Toner saving mode may be turned on. Turning off toner saving mode through the printer driver may improve the printing effect. 3. Cartridge or toner cartridge problem: There may be a problem with the toner or ink cartridge. Remove the toner or ink cartridge, gently shake it back and forth to evenly distribute the toner or ink, and then reinstall it. If the problem persists, […]

There may be two reasons: First, the toner cartridge is not installed properly, which causes the printing device drive wheel and the drum assembly drive wheel to not contact well, thus producing abnormal noise. In this case, just take out the toner cartridge and reinstall it. Second, the spring at the connection between the toner bin and the waste toner bin is aging, falling off or misaligned, resulting in too little resistance or tension, causing the toner cartridge gear to have poor contact and produce abnormal noise. The spring should be replaced.  

While maintaining and replacing toner cartridges, there are some things that need to be reminded again: 1. Cleaning the toner cartridge does not need to be too frequent. It is forbidden to scrub it with ordinary paper during the cleaning process. 2. During the above maintenance and replacement process, it is strictly forbidden to touch the surface of the photosensitive drum with your hands, and prevent collision with hard objects. 3. Try not to expose the toner cartridge directly to sunlight or strong light sources, and do not open the light shield on the toner cartridge casually. If it is continuously exposed to strong light for more than ten minutes, […]