製品ニュース

1. There are sticky substances on the drum core, such as grease, etc. Solution: Wipe the drum core with a clean soft cloth. 2.Filled with powder Solution: Be careful about filling the powder, don't add too much at a time. 3.Toner quality is not good Solution: Choose good quality toner. 4. There is a problem with the waste powder scraper (such as scratches, aging, etc.) Solution: Replace the corresponding accessories. 5.There is a problem with the silo scraper Solution: Replace the corresponding accessories. 6.Drum core is injured Solution: Replace the corresponding accessories.

(1) Use environment: The temperature is over 0 ~ 33 degrees Celsius, the relative humidity is 20 ~ 80%, and the temperature is too high or too low, which will affect the printing effect. (2) Use printing media with caution: Be careful not to use paper with uneven cuts, tears, wrinkles, curling, holes, and staples; paper that is too thick and stiff (especially business card paper) will grind quickly Injury to the photosensitive drum should be used as little as possible; when printing film, the coating of some films will melt and adhere to the fixing roller, causing permanent damage, so special attention should be paid to the selection of […]

If you have print quality problems, follow these steps to clean the corona wire: Do not use any type of spray to clean the inside and outside of the device, as this may result in fire or electric shock. 1.Open the front cover. 2.Slowly remove the drum unit and toner cartridge assembly. 3. We recommend that you place the toner container on a piece of paper that is easy to handle and has a clean, smooth surface to prevent spilling of toner. 4. To prevent damage to the printer from static electricity, do not touch the electrodes shown in the figure. 5.Gently slide the green slider left and right several […]

Laser printing equipment, because of its stable output and large printing volume, has been accepted by various types of enterprises. For such a core component of printing equipment that has fully entered our office life, you may never have noticed that it is a photosensitive drum! When the user is judged by the performance parameters such as the printing speed and printing accuracy on the laser printing device, or is disturbed by dazzling functions such as ID card copying and cloud printing, you may ignore the most important photosensitive drum on the laser printing device. unit. The photosensitive drum unit on the laser printing equipment is the core of the […]

Why is the printer ink head blocked? 1. The ink head of an inkjet printer is very precise, only a few tenths of a person's hair is small, so if the volume of impurities in the printer ink is larger than the size of the ink head, it is obvious that these inks will block in the printer during operation. Ink head, which is an important cause of ink head clogging in inkjet printers. 2. For inkjet printers that have not been used for a long time, the ink near the ink head will harden due to weathering, which is also the cause of the ink head clogging of the […]

F-Fe3O4 crystal powder (PLGMENT): 20-30% Polyacrylate-styrene copolymer: 50-60% CCA: 10-20% Fluidizing agent SiO2, etc. Surface modifier polyethylene / polypropylene paraffin Toner is divided into magnetic toner and non-magnetic toner, and the distribution ratio of the toner used by each machine model is different. Many bottled toners or bulk toners are not distinguished. Only one type of magnetic toner is used. When using the wrong toner or poor toner, it is not only harmful to the human body and the environment, but also damages and affects the printer life.

Difference: 1. The toner cartridge is used for laser printers, and toner is used for printing; the ink cartridges are used for inkjet printers, and inks are used to adapt to different product ranges. 2. The toner cartridge is filled with powder, and the ink cartridge is filled with ink. The ink cartridge can be used for continuous supply, but the toner cartridge cannot. 3, imaging principle, laser printers rely on laser imaging; inkjet printers rely on ink imaging. 4. A box of dozens of toner can print thousands of copies. A box of about 150 ink can only print a few hundred copies. 5. The ink cartridge has a […]

さまざまなニーズに応えるため、トナーの製造は、微細化、カラー化、高速化の方向へと発展しています。 トナーの製造には、主に粉砕法と重合法が用いられます。重合法は、微細な化学炭素粉末技術であり、（懸濁重合、乳化重合、マイクロカプセル充填、分散重合、圧縮重合、化学粉砕）が含まれます。 重合法は液相で完了するため、融点の低い炭素粉末を製造することができ、省エネや環境保護という現代技術の要件を満たすことができます。分散剤の量、撹拌速度、重合時間、および溶液の濃度を調整することで、炭素粉末粒子の粒子径 […]

The laser printer's toner cartridge is an organic silicon photoconductor, which has the problem of working fatigue. Therefore, the continuous working time should not be too long. If the output is large, you can stop after a while and continue to output. Some users use two toner cartridges to work alternately. This is also a way. As for the maintenance of the toner cartridge, it can generally be performed as follows: 1. Carefully remove the toner cartridge assembly and wipe the surface clean with absorbent cotton, but do not apply force to prevent the surface of the toner cartridge from being damaged. 2. Wipe the surface of the toner cartridge […]

1. Avoid using or storing in high temperature, high humidity, and cold environment, and avoid prolonged exposure to strong light; 2. When the toner cartridge is not in use, do not tear the black packaging bag, and do not open the photoconductor cover on the toner cartridge. 3. Do not touch the drum core or rotate the drum core by hand. Pay attention to the direction when the drum core rotates. If the rotation direction is wrong, it will damage the parts and cause powder leakage or smearing during printing. 4. Before the toner cartridge is put on the machine, the handle should be shaken horizontally 4-5 times to make […]

1. Toner cartridge leakage: In addition to damage to the casing, it is usually caused by the accumulation of powder in the magnetic drum inside the toner cartridge during transportation or during use by some customers. The solution is simple, just turn the drum core a few turns in the forward direction. 2. The print file and the drum core have a longitudinal underpass of the same width of more than 1 cm at the same time: the general customer also believes that the powder is leaking. In fact, this is a problem with the scraper, which causes the powder on the stick core to be dirty. 3, the printed […]

For users of laser printers, there are three options for replacing cartridges: original cartridges, general purpose cartridges (or compatible cartridges), and refilled cartridges. Print quality is certainly the first factor for customers to consider, there is no doubt that the original toner cartridge is clearly the best choice. Original toner cartridges, due to careful consideration in the design process with the integration of other parts of the printer, the manufacturing process is meticulous, so you can create the ideal printing results, much better than other compatible products. And heavy-filled toner cartridges due to the manufacturing process using manual methods, printing quality is uneven, difficult to be guaranteed. General universal toner […]