ニュース

The toner chip is a control component on the toner cartridge. Its role is very simple, receive information, store information, feedback information, and control the printer based on this information. 1. Received information, mainly including the print volume of the toner cartridge, the amount of toner and toner coverage. This information is collected by the printer, and then fed back to the toner cartridge chip for storage. In order to ensure the normal operation of the printer, the collected information is unrecoverable. 2. Store information, it will store the toner cartridge model usage and regional information, that is to say, the toner cartridge chip can work only when it meets […]

Paper jams are a common problem with printers. Incorrect removal methods may cause greater damage to the machine. After a paper jam has occurred, turn off the power first, and then open the front door to identify the location of the paper jam. If the paper is stuck in front of the fixing unit, it can be pulled out directly to the inside of the printer (When removing the paper, please pay attention to the fact that the toner particles have been heated. Pressurized, so toner will splash, please pay attention). If the paper is jammed near the fixing unit, pull it gently inwards, and do not pull it outwards […]

After the toner in the toner cartridge is used up, the toner shortage indicator of the printer is on, and the toner cartridge should be refilled. After adding powder, use a soft cloth or a brush to clean around the powder box. At the same time, the power cord of the printer should be unplugged, the front part of the laser printer should be opened, and the toner remaining in the machine should be removed with a vacuum cleaner. Paper scraps (be sure not to blow with your mouth, otherwise it will cause damage to the machine parts), wipe it with a soft cloth, and then put it into the […]

1. Use copy paper correctly Laser printers are used to output paper patterns, so first select the paper. It is best to choose electrostatic copy paper. The range of paper is 60-105g / m2. Generally, 70g / m2 copy paper is often used. Paper that is too thin or too thick can easily cause paper jams. It may be possible to use paper that is too thick Will cause mechanical wear. It is better not to cut the paper by yourself, because the cut paper often has burrs. The accumulation of paper hair in the machine will cause damage to the machine parts and may also scratch the photosensitive drum. […]

1. The printed document and the drum core appear at the same time in the longitudinal width of more than 1 cm at the same time: This is a problem with the scraper, causing the powder on the stick core to be dirty. 2. Long black stripes appear on the printed document: usually the scraper and the small scraper on the side of the scraper are stuck with dirt or paper scraps. 3. A horizontal underworld appears in the print file: usually the magnetic sticks in the toner cartridge have accumulated powder, and it can be rotated a few times. 4. If there is obvious background gray on the printed […]

1. There are sticky substances on the drum core, such as grease, etc. Solution: Wipe the drum core with a clean soft cloth. 2.Filled with powder Solution: Be careful about filling the powder, don't add too much at a time. 3.Toner quality is not good Solution: Choose good quality toner. 4. There is a problem with the waste powder scraper (such as scratches, aging, etc.) Solution: Replace the corresponding accessories. 5.There is a problem with the silo scraper Solution: Replace the corresponding accessories. 6.Drum core is injured Solution: Replace the corresponding accessories.

April 2nd World Autism Awareness Day ,there are 1 in 160 children is suffering from autism , and they are right next to you. We should give more concern and care to them.

(1) Use environment: The temperature is over 0 ~ 33 degrees Celsius, the relative humidity is 20 ~ 80%, and the temperature is too high or too low, which will affect the printing effect. (2) Use printing media with caution: Be careful not to use paper with uneven cuts, tears, wrinkles, curling, holes, and staples; paper that is too thick and stiff (especially business card paper) will grind quickly Injury to the photosensitive drum should be used as little as possible; when printing film, the coating of some films will melt and adhere to the fixing roller, causing permanent damage, so special attention should be paid to the selection of […]

If you have print quality problems, follow these steps to clean the corona wire: Do not use any type of spray to clean the inside and outside of the device, as this may result in fire or electric shock. 1.Open the front cover. 2.Slowly remove the drum unit and toner cartridge assembly. 3. We recommend that you place the toner container on a piece of paper that is easy to handle and has a clean, smooth surface to prevent spilling of toner. 4. To prevent damage to the printer from static electricity, do not touch the electrodes shown in the figure. 5.Gently slide the green slider left and right several […]

Laser printing equipment, because of its stable output and large printing volume, has been accepted by various types of enterprises. For such a core component of printing equipment that has fully entered our office life, you may never have noticed that it is a photosensitive drum! When the user is judged by the performance parameters such as the printing speed and printing accuracy on the laser printing device, or is disturbed by dazzling functions such as ID card copying and cloud printing, you may ignore the most important photosensitive drum on the laser printing device. unit. The photosensitive drum unit on the laser printing equipment is the core of the […]