제품 뉴스

Warping is a common problem in 3D printing, especially when using thermoplastic materials. It occurs when the edges of a printed part curl upward or the bottom gradually lifts away from the build plate. This can affect the appearance of the part and lead to dimensional inaccuracies, failed prints, and material waste. 1. Why Does […]

It is a common issue in office printing environments for a printer to continue displaying messages like "Replace toner," "Low toner," or "Toner cartridge not recognized" even after a new cartridge has been installed. Such issues do not necessarily indicate a quality defect in the toner cartridge itself; they can often be resolved by checking […]

Yes, it is possible. Even if printers belong to the same brand and series, models sold in different countries or regions may use different toner cartridge models. Why does this happen? There are several main reasons: Regional model variations: Different markets may use different part numbers for consumables. Chip compatibility: The chips or recognition mechanisms […]

Every print starts with the ink. ACO Color Refill Ink is formulated to deliver clean, consistent results — whether you are printing a routine document or a colorful creative project. The range covers a complete four-color set — Black, Cyan, Yellow, and Magenta — so everyday printing and vivid color output are covered by a […]

ACO Copy Paper — A4 210×297mm, 500 sheets per ream At ACO, we believe the paper you print on says as much as the words you print. That is why ACO Copy Paper is made to deliver clean, crisp, professional results — every sheet, every ream. Available in three weights to match the job: **70 […]

Not necessarily. GSM (Grams per Square Meter) indicates the paper's weight. For instance, ratings of 70gsm, 75gsm, and 80gsm mean the paper weighs 70g, 75g, and 80g per square meter, respectively. Generally, a higher GSM results in thicker, more rigid paper; however, weight alone does not directly determine quality. To evaluate A4 paper quality, consider […]

5% page coverage means toner covers 5% of a page — roughly what a standard text-only letter uses. It matters because cartridge page yields are measured at this rate, under lab conditions (ISO/IEC 19752), not with your real documents. So the real question is your own coverage: Real pages ≈ Rated yield × (5% ÷ […]

The storage condition of 3D printing filament directly affects the stability of the printing process and the quality of the model. Even high-quality filament can experience problems such as stringing, bubbles, and breakage if improperly stored. 1. Observe the filament's appearance: Well-stored filament typically has a smooth surface, uniform color, and no obvious discoloration, cracks, […]

Color off-color is a common problem in inkjet printing, usually manifesting as a discrepancy between the printed color and the screen display or expected result. This phenomenon is often caused by a combination of factors. 1. Ink formulation and color ratio mismatch: Different brands of ink have different toner ratios. If the red, yellow, and […]

Print density is a crucial indicator of the darkness and clarity of printed content, and toner is one of the core factors affecting print density. 1. Toner quality affects blackness performance. High-quality toner particles are uniform and have stable flowability, forming a uniform coverage on the paper surface, resulting in higher print density and clearer […]

ACO는 HP, Canon 및 OKI 프린터 시스템용 호환 토너 카트리지 신제품 라인을 출시합니다. 이 제품은 애프터마켓 공급망에 안정적이고 신뢰할 수 있는 인쇄 성능을 유지하면서 전 세계적인 제품 지원 범위를 확대하기 위해 설계되었습니다. 각 카트리지는 일관된 출력 품질, 안정적인 인쇄 매수, 대상 프린터 모델과의 원활한 호환성을 보장하도록 설계되어 유통업체, 리셀러, […]를 지원합니다.

Many people believe that the whiter the paper, the better when choosing printing paper. In reality, paper whiteness is just one indicator of paper quality, and higher whiteness isn't necessarily better for all printing scenarios. 1. Whiteness Affects Visual Effects: Higher whiteness paper enhances the contrast of text and images, making content appear clearer and […]