Notizie sui prodotti

Nel processo di stampa 3D, il contenuto di umidità del filamento è un fattore cruciale che determina la qualità della stampa. Quando l'umidità dell'aria è troppo elevata, i filamenti di plastica assorbono l'umidità, causando problemi quali bolle, incordature e rugosità della superficie durante la stampa, con conseguenti ripercussioni sulla precisione del modello e sulla resistenza meccanica. 1. Differenze nelle caratteristiche dei materiali che assorbono l'umidità Diversi tipi [...]

1. The toner in the toner cartridge is sealed in the powder bin during production. Shake the cartridge 6-8 times before use 2. Pull out the seal in the direction of the arrow 3. When pulling out the seal, pull it out evenly and straight to avoid breaking it 4. When installing the toner cartridge […]

1. Check compatibility When buying a toner cartridge, make sure it is fully compatible with the printer model. This not only involves the model of the toner cartridge, but also pay attention to whether it is compatible with the specific version of your printer. 2. Understand the number of printed pages The number of printed […]

1. Since the specific structure of each toner cartridge is different, you can study it according to the actual situation when replacing it, remember the steps and the location of the accessories, and make sure it can be removed and installed. 2. The added toner should be the toner of the same model of laser […]

Because the print head is not sealed tightly after normal printing or is left for a long time, the water evaporates excessively, causing the ink particles to dry on the fine tip of the print head, making the ink unable to spray normally; or different inks are mixed with each other, resulting in chemical reactions, […]

The OPC（Organic Photoconductor）is the photosensitive drum, which is the core component of the laser printer. It is generally not sticky with toner. If there is toner on the drum core, it should be cleaned in time. The possible reasons why the drum core is sticky with toner are: 1. There are sticky substances such as […]

Toner powder are not universal. The universality of toner powder depends on multiple factors, including electrical properties, magnetism, etc. Specifically： Electrical properties: The electrical properties of toner powder must be consistent. Magnetic properties: Magnetic powder can barely replace non-magnetic powder, but non-magnetic powder can never replace magnetic powder.

1. Clean the toner cartridge chip If the printer does not correctly detect the toner cartridge, it will prompt "Consumables remaining error". You can remove the toner cartridge and use a clean cotton swab or paper towel to clean the toner cartridge chip 2. Reinstall the toner cartridgeIf the toner cartridge is not installed in […]