Tin tức ngành

The storage condition of 3D printing filament directly affects the stability of the printing process and the quality of the model. Even high-quality filament can experience problems such as stringing, bubbles, and breakage if improperly stored. 1. Observe the filament's appearance: Well-stored filament typically has a smooth surface, uniform color, and no obvious discoloration, cracks, […]

Many users immediately assume that lighter colors or faded text during printing is a toner cartridge problem. However, decreased print quality can be caused by a combination of factors, not just the toner cartridge. 1. Insufficient Toner: When a toner cartridge has been used for a long time and the toner is nearly depleted, the […]

Color off-color is a common problem in inkjet printing, usually manifesting as a discrepancy between the printed color and the screen display or expected result. This phenomenon is often caused by a combination of factors. 1. Ink formulation and color ratio mismatch: Different brands of ink have different toner ratios. If the red, yellow, and […]

In the office printing and consumables distribution market, an increasing number of wholesalers are opting for suppliers that offer a wide range of products, rather than just single-product sourcing. This trend is driven by clear market and operational logic. 1. Reduced Procurement and Communication Costs: Multi-category suppliers can provide toner cartridges, ink, powder, paper, and […]

When printing results in blurry text, faded colors, black lines, black spots, or gray background, many users wonder: is it a paper problem or a toner cartridge problem? Actually, the cause can be quickly found through simple troubleshooting. 1. Check the paper condition first. If the paper is damp, wrinkled, or has poor surface quality, […]

In the modern office and printing industry, a stable consumables supply chain not only affects daily operational efficiency but also directly impacts cost control and customer service quality. 1. Guaranteed Continuous Supply An unstable consumables supply can easily lead to stockouts or delivery delays, disrupting normal business operations and customer order fulfillment. This is especially […]

Paper humidity is a crucial factor affecting print quality. Both excessively high and low humidity levels can impact print quality and equipment operation. 1. High Humidity: Causes Deformation and Paper Jams When paper absorbs too much moisture, it can bend, wrinkle, or stick together, leading to feeding difficulties and even paper jams. Additionally, overly wet […]

Using or storing toner cartridges in high-temperature environments can significantly impact their performance, consequently affecting print quality and equipment stability. 1. Changes in toner flowability: High temperatures can cause toner to become looser or even clump, affecting its uniform distribution on the magnetic roller and leading to issues like graying, uneven printing density, or poor […]

The surface treatment of printing paper directly affects the ink absorption speed, diffusion rate, and final print quality. Different types of paper exhibit significant differences in performance. 1. Smoother Surface, Less Ink Diffusion Coated paper (such as photo paper or inkjet paper) has a smoother surface and an ink-absorbing layer, effectively controlling ink diffusion and […]

Ink waste not only increases costs in daily printing but also affects equipment efficiency. Proper use and optimized settings can effectively reduce unnecessary consumption. 1. Use the Appropriate Print Mode For everyday documents, choose "Draft Mode" or "Economy Mode" to reduce ink consumption without affecting readability. 2. Avoid Frequent Power On/Offs Inkjet printers automatically clean […]

In the 3D printing process, printing temperature is one of the key parameters affecting model quality. Improper temperature settings often directly lead to printing defects. 1. Too Low Temperature: Poor Bonding When the nozzle temperature is too low, the filament cannot melt sufficiently, resulting in insufficient adhesion between layers, easily leading to delamination, cracking, or […]

In daily printing, paper jams not only affect efficiency but can also damage printing equipment. The quality and characteristics of the paper itself are a significant contributing factor. 1. Damp or excessively dry paper: Damp paper is prone to warping and sticking together, while excessively dry paper is prone to static electricity, both leading to […]