Новости о продукции

1. Low cost The gas packaging bag is composed of 99% air and 1% plastic film. The packaging material is completely flat before use, which does not occupy space and can save a lot of transportation and storage costs. Under general conditions of use, gas packaging bags can save you 20% to 40% of the […]

The toner chip is a control component on the toner cartridge. Its role is very simple, receive information, store information, feedback information, and control the printer based on this information. 1. Received information, mainly including the print volume of the toner cartridge, the amount of toner and toner coverage. This information is collected by the […]

1. Use copy paper correctly Laser printers are used to output paper patterns, so first select the paper. It is best to choose electrostatic copy paper. The range of paper is 60-105g / m2. Generally, 70g / m2 copy paper is often used. Paper that is too thin or too thick can easily cause paper […]

1. There are sticky substances on the drum core, such as grease, etc. Solution: Wipe the drum core with a clean soft cloth. 2.Filled with powder Solution: Be careful about filling the powder, don't add too much at a time. 3.Toner quality is not good Solution: Choose good quality toner. 4. There is a problem […]

(1) Use environment: The temperature is over 0 ~ 33 degrees Celsius, the relative humidity is 20 ~ 80%, and the temperature is too high or too low, which will affect the printing effect. (2) Use printing media with caution: Be careful not to use paper with uneven cuts, tears, wrinkles, curling, holes, and staples; […]

If you have print quality problems, follow these steps to clean the corona wire: Do not use any type of spray to clean the inside and outside of the device, as this may result in fire or electric shock. 1.Open the front cover. 2.Slowly remove the drum unit and toner cartridge assembly. 3. We recommend […]

Laser printing equipment, because of its stable output and large printing volume, has been accepted by various types of enterprises. For such a core component of printing equipment that has fully entered our office life, you may never have noticed that it is a photosensitive drum! When the user is judged by the performance parameters […]

Why is the printer ink head blocked? 1. The ink head of an inkjet printer is very precise, only a few tenths of a person's hair is small, so if the volume of impurities in the printer ink is larger than the size of the ink head, it is obvious that these inks will block […]

F-Fe3O4 crystal powder (PLGMENT): 20-30% Polyacrylate-styrene copolymer: 50-60% CCA: 10-20% Fluidizing agent SiO2, etc. Surface modifier polyethylene / polypropylene paraffin Toner is divided into magnetic toner and non-magnetic toner, and the distribution ratio of the toner used by each machine model is different. Many bottled toners or bulk toners are not distinguished. Only one type […]

Difference: 1. The toner cartridge is used for laser printers, and toner is used for printing; the ink cartridges are used for inkjet printers, and inks are used to adapt to different product ranges. 2. The toner cartridge is filled with powder, and the ink cartridge is filled with ink. The ink cartridge can be […]

To meet different needs, toner production is developing in the direction of refinement, colorization and high speed. Toner manufacturing mainly uses crushing and polymerization methods: Polymerization method The polymerization method is a fine chemical carbon powder technology, which includes (suspension polymerization, emulsion polymerization, microcapsule filling, dispersion polymerization, compression polymerization, chemical pulverization). The polymerization method is […]