Notícias

1. The toner in the toner cartridge is sealed in the powder bin during production. Shake the cartridge 6-8 times before use 2. Pull out the seal in the direction of the arrow 3. When pulling out the seal, pull it out evenly and straight to avoid breaking it 4. When installing the toner cartridge […]

1. Check compatibility When buying a toner cartridge, make sure it is fully compatible with the printer model. This not only involves the model of the toner cartridge, but also pay attention to whether it is compatible with the specific version of your printer. 2. Understand the number of printed pages The number of printed […]

1. Since the specific structure of each toner cartridge is different, you can study it according to the actual situation when replacing it, remember the steps and the location of the accessories, and make sure it can be removed and installed. 2. The added toner should be the toner of the same model of laser […]

HP firmware updates continue to affect third-party cartridge compatibility. The latest versions impact OfficeJet and LaserJet models, prompting users to check before installing. HP has released new firmware updates affecting a range of OfficeJet and LaserJet printers, raising concerns among users reliant on third-party cartridges. Firmware version 2514A, dated 6 May 2025, applies to HP […]

Because the print head is not sealed tightly after normal printing or is left for a long time, the water evaporates excessively, causing the ink particles to dry on the fine tip of the print head, making the ink unable to spray normally; or different inks are mixed with each other, resulting in chemical reactions, […]

The OPC（Organic Photoconductor）is the photosensitive drum, which is the core component of the laser printer. It is generally not sticky with toner. If there is toner on the drum core, it should be cleaned in time. The possible reasons why the drum core is sticky with toner are: 1. There are sticky substances such as […]

O pó de toner não é universal. A universalidade do pó de toner depende de múltiplos factores, incluindo propriedades eléctricas, magnetismo, etc. Especificamente: Propriedades eléctricas: As propriedades eléctricas do pó de toner deve ser consistente. Propriedades magnéticas: O pó magnético mal pode substituir o pó não magnético, mas o pó não magnético nunca pode substituir o pó magnético.