Мэдээ

1、Introduction Thanks for choosing our new the「mal label printer AD-B3150TIN. This product provides reliable performance and high printing quality at an economical price. With powerful functions and easy operation design, GP-3150TIN is your best choice of thermal label printer A CAUTION, NOTE CAUTION: MUST COMPLY, OTHERWISE HUMAN GET HARM AND DEVICES DAMAGE.NOTE: IMPORTANT INFORMATIONduc AND […]

Main Features: 1, Built-in power supply 2, Maximum print speed: 5inch/s 3, Support different sizes of thermal paper roll / Adhesive paper 4, Simultaneously meets different needs in the range of media width 25~120mm, easy to operate 5, Automatic paper Detect function 6, Temperature adaptive control 7, Modular design to meet different needs Button Instructions […]

Attentions: The printer should be installed in a flat, stable location; • Leave enough space around the printer for operation and maintenance; • Keep the printer away from water and direct sunlight, glare, and heat; • Do not use or store the printer in places with high temperatures, high humidity, and heavy pollution; • Avoid […]

Packing List Printer 1PC Power Adapter 1PC USB Cable 1PC Power Cable 1PC User's Manual(Including Warranty card, Certification) 1PC Main Features Support thermal paper roll / Adhesive paper Simultaneously meets different needs in the range of media width 25~60mm, easy to operate Automatic paper calibrate function Label and bill printing 2 in 1 With U disk function, USB drive with driver and installation […]

Inkjet printers are much more expensive than laser printers. In addition to the maintenance of the machine during the maintenance process, the use environment must also be clean, mainly to ensure that the inkjet printer is in use, the nozzle does not cause plugging due to dust in the air. 1. Do not expose the […]

There are two reasons for the absence of copy images, one is that the connection of the charging or transfer electrode to the high voltage transformer is damaged, and the other is that the high voltage transformer itself is damaged. When checking, open the back cover of the machine and remove the electrode socket. After […]

There are two reasons for the absence of copy images, one is that the connection of the charging or transfer electrode to the high voltage transformer is damaged, and the other is that the high voltage transformer itself is damaged. When checking, open the back cover of the machine and remove the electrode socket. After […]

First, the printer prints out fuzzy or missing words 1. Check the power supply to ensure that it is the power supply specified by the manufacturer. 2. Check if the paper size meets the printing requirements. 3. Check if there is any foreign matter such as dust on the thermal head and remove it. 4. […]

First, install software, drivers 1. Insert the CD into the CD-ROM drive. If it does not start automatically, open the file on the CD-ROM and double-click "Setup.exe". Installation tips Step by step to install the P-touch software. 2. Follow the prompts to select the labeler driver model. When prompted, connect your label printer to the […]

After the printer cartridge is dry, if it is used again, you need to clean the printer cartridge first to prevent the print head from being blocked. The following is the printer cartridge cleaning method: 1. Carefully remove the ink cartridges from the printer. 2. After removing the ink cartridge, find the nozzle of the […]

The first thing to look at is what model your pin printer is, and then determine how long it can take, because the different models of the machine ribbon are different, and the color is long and short. If the general print volume is not very large, you can count the last 1M1 days. This […]

1. Problem: bottom ash Reasons: low humidity, high temperature; PCR (charge roller) defects; magnetic roller sheath and coating defects; PCR or corona electrical contact defects; OPC (photosensitive drum) defects; poor carbon powder, carbon powder mixed; Solution: Best RH=50-60%; replace defective parts; replace toner; check high voltage power supply. 2, the problem: ghost Reasons: cleaning blade, […]