أخبار المنتجات

1. قم بتنظيف شريحة خرطوشة الحبر إذا لم تكتشف الطابعة خرطوشة الحبر بشكل صحيح، فستظهر لك عبارة "خطأ في المواد المستهلكة المتبقية". يمكنك إزالة خرطوشة الحبر واستخدام قطعة قطن نظيفة أو منشفة ورقية لتنظيف شريحة خرطوشة الحبر 2. أعد تركيب خرطوشة الحبرإذا لم يتم تركيب خرطوشة الحبر في [...].

1. Vertical black lines of more than 1 cm in width appear on both the printed document and the drum core: This is a problem with the scraper, which causes the powder on the stick core to not be scraped cleanly. 2. Vertical thin black lines appear on the printed document: Usually the scraper and […]

From the cost point of view, the cost of adding toner to the toner cartridge is much lower than that of replacing the toner cartridge, so adding toner is more cost-effective. However, from the actual use, since the toner cartridge is a sealed disposable consumable, adding toner by yourself will destroy the sealing performance of […]

1. First turn off the printer power switch, unplug the printer from the power outlet. 2. Then open the flip cover of the laser printer, carefully remove the photoconductor assembly, wipe its surface with a degreasing cotton, but can not force, in order to prevent the surface of the photoconductor scratched. 3. Next, wipe the […]

1. Do not place heavy objects on the copier. 2. Be careful not to let paper scraps, staples or other small metal objects fall into the copier. 3. Do not try to remove any fixed plates or covers while the copier is running, and do not turn off the power switch. 4. When making large […]

1. High density. The minimum printing resolution of laser printers is 300dpi, and there are also high resolutions such as 400dpi, 600dpi, 800dpi, 1200dpi, 2400dpi and 4800dpi. 2. High speed. The minimum printing speed of laser printers is 4ppm, generally 12ppm, 16ppm, and some laser printers can reach a printing speed of more than 24ppm. […]

1. When removing the "paper jam", only move the parts that are allowed to move in the copier manual. 2. Take out the whole paper at once as much as possible, and be careful not to leave broken pieces of paper in the machine. 3. Do not touch the photosensitive drum to avoid scratching the […]

1. Paper runs out When the paper runs out, the panel will show an empty paper tray signal, and you can load copy paper. You can continue copying. 2. Insufficient toner When the toner is insufficient signal light is on, it means that the toner in the machine is almost used up, which will affect […]